Connecting Wires To Terminals - Kenwood KDC-W707 Instruction Manual

Connecting Wires to Terminals

KDC-W808
Front left output (White)
A "FRONT"
Front right output (Red)
Rear left output (White)
B "REAR"
Rear right output (Red)
Sub Woofer left output (White)
C "SUB WOOFER"
Sub Woofer right output (Red)
AUX left input (White)
D "AUX IN"
AUX right input (Red)
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3)
Antenna Cord (ISO)
FM/AM antenna input
Kenwood disc changer input
To connect the Disc changer,
consult your Disc changer
manual.
Battery wire (Yellow)
Ignition wire (Red)
See next page
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
KDC-W707
"FRONT"
—
—
"REAR"/
"SUB WOOFER"
D
A
Wiring harness
(Accessory1)
External amplifier control wire
(Pink/Black)
TEL mute wire (Brown)
If no connections are made, do
not let the wire come out from
the tab.
Power control/Motor
antenna control wire
(Blue/White)
Front left output (White)
Front right output (Red)
—
—
—
—
Rear left output (White)/
Sub Woofer left output (White)
Rear right output (Red)/
Sub Woofer right output (Red)
C
B
Fuse (10A)
To "EXT.AMP.CONT. " terminal of the
amplifier having the external amp
control function.
Connect to the terminal that is grounded
when either the telephone rings or during
conversation.
To connect the Kenwood
navigation system, consult
your navigation manual.
Connect either to the power
control terminal when using the
optional power amplifier, or to
the antenna control terminal in
the vehicle.
To External Display/
Steering remote
|
English
41