Equalizer Control - Kenwood KDC-PSW9531 Instruction Manual

General features

Equalizer Control

1
Select the source to adjust
Press the [SRC] button.
2
Show the Multi-function display
Press the [NEXT] button repeatedly until "EQ"
appears.
Refer to <Notes on Multi-function System> (page
9).
3
Enter Equalizer Control mode
Turn the [VOL] knob to select "EQ".
Press the [VOL] knob.
• When "2ZONE" of <Audio Setup> (page 11) is ON, you
cannot select "EQ".
4
Select the Equalizer Control item to adjust
Turn the [VOL] knob to select the item you
want to select.
Press the [VOL] knob.
Multi-function item Equalizer Control Item
"SystemQ" System Q Setting
"Front" Equalizer Front Setting
"Rear"* Equalizer Rear Setting
"Preset" Preset value storage/recalling
• "Preset": You can store an adjusted sound control
value by selecting "Memory". Refer to
<Memory mode> (page 16). Also, you
can recall it by selecting "Recall". Refer to
<Memory Recall mode> (page 16).
• * You can control this item when Speaker Select Rear
of <Sound Management system> (page 13) is set to
any item other than "None".
5
Adjust the Equalizer control item
System Q Setting (Sound Type)
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
Sound setting
User memory
Natural
Rock
Pops
Easy
14
|
English
Display
"User"
"Natural"
"Rock"
"Pops"
"Easy"
Top 40 "Top40"
Jazz "Jazz"
• User memory:
The values set on the <Equalizer Front Setting/
Equalizer Rear Setting>.
• Change each setting value with the <Sound
Management system> (page 13).
First, select the speaker type with the Speaker setting.
Equalizer Front Setting/
Equalizer Rear Setting
1 Select a frequency band you wish to adjust
Press the Control knob.
Each time you press the button is pressed, the
band alternates between "Band 1" and "Band 4".
2 Select the items to adjust for Equalizer.
Press the [FM] or [AM] button.
Each time you press the button is pressed, the
item to be adjusted alternates between the
items shown in the table below.
1 2 Equalizer Control Item
"Band1"/ "FREQ" Equalizer Frequency
"Band2"/
"Level" Equalizer Level
"Band3"/
"Q Factor" Equalizer Quality
"Band4"
3 Adjust the Equalizer.
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
Equarizer adjustment item
Equalizer Front Frequency/
Equalizer Rear Frequency
Equalizer Front Level/
Equalizer Rear Level
Equalizer Front Quality/
Equalizer Rear Quality
• The frequency which can be selected by each
Frequency band is shown below.
Band Frequency
Band1 60/ 80/ 100/ 120/ 160/ 200 (Hz)
Band2 250/ 315/ 400/ 500/ 630/ 800/ 1k (Hz)
Band3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 (kHz)
Band4 5/ 6.3/ 8/ 10/ 12.5/ 16 (kHz)
Range
Refer to the followings.
–9 — +9
0.25/ 0.50/ 1.00/ 2.00