Voice Index; Acdrive Firmware Version Display; Unique Id Display; Demonstration Mode Setting - Kenwood KDC-PSW9531 Instruction Manual

When the downloading finishes, "Finished
Download" is displayed.
• Picture downloading may take as long as 20 minutes.
Quantity Gradation Level
Cancelling Downloading
Press the [MENU] button.
8
Exit the downloading mode
Press the [MENU] button.
• Do not operate this unit,while "Downloading" is
displayed to prevent data from being damaged.
• The number of files that can be downloaded.
- Wallpaper: 1 file
• When a new wallpaper is downloaded, it will
overwritte the currently downloaded wallpaper.
There is no way to delete the downloaded pictures.
• The downloaded pictures can be used for display.
<Graphic part/ Spectrum Analyzer Display Switching>
(page 18)
<Wallpaper selecting> (page 19)
• When you cannot download the pictures to this unit,
there may be a problem with the CD-R/CD-RW write
method.
Refer to the URL http://www.kenwood.net-disp.com,
and rewrite the CD-R/CD-RW.
Function of ACDrive disc

Voice Index

Setting the announcement during the play of
ACDrive disc.
Display Setting
"Voice Index: ON" Guide is announced.
"Voice Index: OFF" Not be announced.
In CD mode

ACDrive firmware version display

Displaying the firmware version with the ACDrive
function.
1
Select the firmware version display mode
Push the Control knob towards [4] or
[¢].
Select the "ACD F/W Version" display.
2
Display the ACDrive firmware version
Push the Control knob towards [FM] or [AM].
In CD mode

Unique ID display

Displaying the serial number for each product.
1
Select the unique ID display mode
Push the Control knob towards [4] or
[¢].
Select the "ACD Unique ID" display.
2
Display the unique ID
Push the Control knob towards [FM] or [AM].
In Standby mode

Demonstration mode Setting

Sets the demonstration mode.
1
Select the Demonstration mode
Push the Control knob towards [4] or
[¢].
Select the "DEMO Mode" display.
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
Display Setting
"DEMO Mode: ON" The Demonstration mode function is ON.
"DEMO Mode: OFF" Exit Demonstration mode (Normal mode).
49
|
English