Amp Control; News Bulletin With Timeout Setting; Local Seek; Tuning Mode - Kenwood KDC-PSW9531 Instruction Manual

Menu system
When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the
unit.
1
Select AMP Control mode
Push the Control knob towards [4] or
[¢].
Select the "AMP Control" display.
2
Enter AMP Control mode
Press the Control knob for at least 1 second.
3
Select the AMP Control item for adjustment
Push the Control knob towards [FM] or [AM].
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4
Adjust the AMP Control item
Push the Control knob towards [4] or
[¢].
5
Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.

News Bulletin with Timeout Setting

The tuner automatically changes when a news
bulletin starts even if the radio is not being
listened to. Also, you can set the time interval
when interruption is prohibited.
Display and Setting
"News: OFF"
"News: 00min"
"News: 90min"
When you set "News: 00min" — "News: 90min",
the News Bulletin Interrupt function is ON.
When the news bulletin starts, "NEWS " is
displayed, and the tuner changes to the news
bulletin.
• If you choose the "20min" setting, further news
bulletins will not be received for 20 minutes once the
46
|
English
first news bulletin is received.
• The news bulletin volume is the same level that was
set for <Traffic Information> (page 30).
• This news bulletin function is only available if the
desired station sends PTY-code for news bulletin or
belongs to <Enhanced Other Network>-Network
sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, the
tuner changes to an FM station.
In Tuner mode

Local Seek

Only stations whose reception is good are
searched in auto seek tuning.
Display Setting
"Local.Seek: OFF" The local seek function is OFF.
"Local.Seek: ON" The local seek function is ON.
In Tuner mode

Tuning Mode

Sets the tuning mode.
Tuning mode Display
Auto seek "Seek Mode:
Auto1"
Preset station seek "Seek Mode:
Auto2"
Manual "Seek Mode:
Manual"

AF (Alternative Frequency)

When the reception is poor, automatically
alternate to another frequency broadcasting the
same program in the same RDS network with
better reception.
Display Setting
"AF: ON" The AF function is ON.
"AF: OFF" The AF function is OFF.
When the AF function is ON, the "RDS" indicator
is ON.
Operation
Automatic search for a station.
Search in order of the stations
in the Preset memory.
Normal manual tuning control.