Preset Equalizer Curve Select; Manual Equalizer Control - Kenwood KDC-X994 Instruction Manual

Preset Equalizer curve Select

You can select following Equalizer curve.
Display Equalizer curve
"Natural" Natural
"User" User*
"Rock" Rock
"Pops" Pops
"Easy" Easy
"Top 40" Top 40
"Jazz" Jazz
"Game" Game
"iPod" iPod (During iPod source only)
* The Equalizer curve set in the section <Manual Equalizer
Control> is recalled.
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Preset Equalizer mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Equalizer"
4
Select the Equalizer curve
Press the [4] or [¢] button.
✍ Select the iPod Equalizer curve
You can select from 22 Equalizer curve types for
iPod when "iPod" is selected.
1. Enter iPod Equalizer mode
Press the [VOL] knob.
2. Select the iPod Equalizer curve
Press the [4] or [¢] button and press it
when the desired item is displayed.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• You can select for each source.
( : Factory setting)
"Preset Equalizer".

Manual Equalizer Control

You can adjust following Equalizer Control items.
KDC-X994/ KDC-X794
Band Item
"BAND1" (62.5 Hz) "GAIN" Band level
"EFCT" Bass Effect
"BAND2" (250 Hz) "GAIN" Band level
"BAND3" (1 kHz) "GAIN" Band level
"BAND4" (4 kHz) "GAIN" Band level
"BAND5" (16 kHz) "GAIN" Band level
KDC-BT945U/ KDC-MP745U
Band Item
"BAND1" (60/ 100/ "GAIN" Band level
160/ 250/ 400 Hz)
"Q" Quality
"BAND2" (630/ 1k/ "GAIN" Band level
1.6k/ 2.5k Hz)
"Q" Quality
"BAND3" (4k/ 6.3k/ "GAIN" Band level
10k/ 16k kHz)
"Q" Quality
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Manual Equalizer Control mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Equalizer"
4
Select the item you want to set
Operation type
Selects the item.
Adjust each item.
Set the value
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• When "iPod" is selected in the section <Preset Equalizer
curve Select> (page 39), Manual Equalizer Control is
disabled.
• You can select for each source.
Range
-9 –+9 dB
"ON"/ "OFF"
-9 –+9 dB
-9 –+9 dB
-9 –+9 dB
-9 –+9 dB
( : Factory setting)
Range
-9 –+9 dB
0.25/ 0.5/ 1.0/
2.0
-9 –+9 dB
0.25/ 0.5/ 1.0/
2.0
-9 –+9 dB
0.25/ 0.5/ 1.0/
2.0
( : Factory setting)
"Manual Equalizer".
Operation
Turn the [VOL] knob.
Press the [4] or [¢] button.
Press the [VOL] button.
English
39
|