Controlling General Audio; Equalizer Control - Kenwood DMX8018S Instruction Manual

Controlling General Audio

1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [Audio].
h Audio screen appears. h
3
Touch [Fader / Balance].
4
Set each item as follows.
[Fader / Balance]
■
Adjust the volume balance around the
touched area.
[C] and [D] adjust the right and left volume
balance.
[R] and [S] adjust the front and rear volume
balance.
■
[Center]
Clear the adjustment.

Equalizer Control

You can adjust equalizer by selecting the
optimized setting for each category.
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [Audio].
h Audio screen appears. h
3
Touch [Equalizer].
4
Touch the screen and set the Graphic
Equalizer as desired.
Gain level (dotted frame area)
■
Adjust the gain level by touching the each
frequency bar.
You can select frequency bar and adjust its
level by [R], [S].
[Preset Select]
■
Displays the screen to recall the preset
equalizer curve.
■ [Memory]
Saves the adjusted equalizer curve from
"User1" to "User4".
■ [Initialise]
The current EQ curve returns to flat.
[ALL SRC]
■
Apply the adjusted equalizer to all sources.
Touch [ALL SRC] and then touch [OK] on the
confirmation screen.
[Bass EXT] (Bass Extend Settings)
■
When turned on, the frequency lower than
62.5 Hz is set to the same gain level as 62.5
Hz.
Controlling Audio
49
English