Checking Vertical Print Alignment (V-Almnt); Procedure - Fujitsu DL 3750+ User Manual

USING SETUP MODE
< < F U N C T I O N > >
SAVE&END MENU1
V-ALMNT
5-56

Checking Vertical Print Alignment (V-ALMNT)

The V-ALMNT function corrects the vertical character displacement that
sometimes occurs with bidirectional printing. Characters printed from left to
right are not aligned with characters printed from right to left as shown
below:
This
when
misaligned.
margin is not straight.
If you notice misaligned printing, use the following procedure to check and
correct the vertical print alignment.

Procedure

Make sure that continuous forms paper is loaded in the printer. If possible,
use forms at least 216 mm (8.5 inches) wide for 80 column printers or
356mm (14inches) wide for 136 colmun prnters to avoid printing on the
platen.
However, you can also use letter or A4 size forms if you set the WIDTH
option in MENU1 to 8 inches.
See the section Changing MENU1 and MENU2 Options for details. Then
proceed as follows to check and correct vertical print alignment:
1. Enter setup mode.
Press the MENU button and the TEAR OFF button simultaneously
until the printer beeps. Wait for the printer to stop printing and
check that the following <<FUNCTION>> menu is printed:
MENU2 HARDWRE ADJUST
example shows how
characters are
Note that the left
CONFIG DEFAULT
printing looks
vertically
LIST SELF-TST HEX-DUMP
User's Manual