Table of Contents
Advertisement
User's Manual
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Options
Items
<PRT-DIR>
BI-DIR
UNI-DIR
<BUZZER>
ON
OFF
<WORD-LG>
8 BIT
7 BIT
<BUFFER>
NONE
256BYTE
2KBYTE
8KBYTE
24KBYTE
32KBYTE
96KBYTE
128KBYT
USING SETUP MODE
Description
Bidirectional printing. The printer prints
in either direction while seeking the next
print direction for a shorter print time.
Unidirectional printing. Unidirectional
printing is used for printing vertical lines
in tables even if vertical alignment is not
adjusted. Unidirectional printing is
slower than bidirectional printing.
Enables or disables the printer status
buzzer.
Buzzer on (recommended).
The printer beeps to indicate paper-
out or other conditions.
Buzzer off under any conditions.
To determine the required word
length, refer to your computer
documentation. Select 8-BIT to print bit
image graphics.
8-bit word length (used by most
computers)
7-bit word length (MSB = 0)
Assigns buffer memory to input data and
downloaded font data.
Print buffer
Download buffer
0 byte
128K bytes
256 bytes
127.75K bytes
2K bytes
126K bytes
8K bytes
120K bytes
24K bytes
104K bytes
32K bytes
96K bytes
96K bytes
32K bytes
128K bytes
0K bytes
5-31
Advertisement
Table of Contents
