Audio Control Setting - Kenwood KDC-MP6090R Instruction Manual

Scan of Flat – Easy
(Default setting)
User memory*
Flat
Rock
As you proceed, each indicator would go on.
NOTE
The System Q function changes the values of the following
sound quality parameters:
Bass centre frequency, bass level, bass quality factor, bass
extend, middle centre frequency, middle level, middle quality
factor, treble centre frequency, and treble level.
Their setting values are different depending on the setting of the
speaker setting mode.

Audio Control Setting

Adjust various parameters of sound quality.
1
Hold down the AUD button for one second or more to enter
the control mode.
2
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Volume Offset
Bass
Fader
Middle
Treble Balance
Easy
Jazz
Pops
*User memory:
The unit returns to the state
Top 40
adjusted the last time with
the audio control setting feature.
NOTE
Source tone memory
Each source (CD, FM, AM and disc changer) has its own memory
in which to store the bass, middle and treble tone settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
3
Adjust each mode
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Adjustment
mode
4 button
(Display)
Bass ("Bass")
Bass decreased.
Middle("Middle")
Middle decreased.
Treble("Treble")
Treble decreased.
Left channel emphasized.
Balance("Balance")
Fader ("Fader") Rear channel increased.
Volume Offset The sound level of
("V Offset") each source decreased.
4
Press the AUD button to end the control mode.
NOTE
Determining the parameters in the audio control setting will clear
all the adjustments made in the System Q and they are replaced
with the values made in the audio control setting.
— 11 —
Operation of Audio control button
¢ button
Bass increased.
Middle increased.
Treble increased.
Right channel emphasized.
Front channel increased.
The sound level of
each source increased.