Mp3 Player Features; Playing Mp3 Files - Kenwood KDC-MP6090R Instruction Manual

MP3 player features

#2 REP
#3/RDM
Track number
IN indicator
38 0
FM
SRC
DISP AM
Release
button
4 ¢
Track time
— 26 —

Playing MP3 Files

Play:
Press the Release button to slide open the faceplate, showing
the CD (insertion) slot.
Holding the media with the labeled side facing up, insert it in
the slot. The media will start playing. Push back the bottom of
the faceplate with your hand until it locks.
The IN indicator will light when a media has been inserted.
2CAUTION
When inserting a media, make sure the media has been
completely drawn in before pushing back the faceplate. Failing to
do so might scratch the media.
Playing Media Already Inserted:
Press the SRC button repeatedly to select the CD mode.
"CD" is displayed when the CD mode has been selected.
The media will start playing.
Pausing and Restarting Media Play:
Press the 38 button to make the media pause.
Press the same button again to start play again.
NOTE
MP3-related operations (such as a file search and folder search)
cannot be performed during a pause. Cancell the pause before
you can perform such operations.
Eject:
Press the release button and slide open the faceplate.
Press the 0 button.
The media stops playing and ejects from the slot.
Push back the bottom of the faceplate with your hand until it
locks.
2CAUTION
• Do not attempt to insert a media into the slot if another one is
already there.
• When the faceplate has been slid open, it might interfere with
the gear lever or something else. If this happens, pay attention
to safety and move the gear lever or take an appropriate action,
then operate the unit.
• Do not use the unit with the faceplate in the slid condition.