Bass Centre Frequency; Bass Level; Bass Quality Factor; Bass Extend - Kenwood KDC-7090R Instruction Manual

Audio control features

Bass Centre Frequency

Adjust the centre frequency of the bass.
Display and setting:
"Bass FRQ"/"Bass F" : 60 / 70 / 80 / 100 (Only when the bass
quality factor is set to 1.00, 1.25 or 1.50)
/ 150 (Only when the bass quality factor
is set to 2.00) Hz.

Bass Level

Adjust the bass level.
Display and setting:
"Bass" : - 8 – + 8

Bass Quality Factor

Adjust the Bass quality factor.
Display and setting:
"Bass Q" : 1.00 / 1.25 / 1.50 / 2.00

Bass Extend

Switch the Bass Extend mode on/off.
Display and setting:
"Bass EXT" : ON / OFF (When the bass extend mode is set to
on, low frequency response is extended by 20%.)

Middle Centre Frequency

Adjust the centre frequency of the middle.
Display and setting:
"MID FRQ"/"MID F" : 0.5 / 1.0 / 1.5 / 2.0 kHz

Middle Level

Adjust the middle level.
Display and setting:
"MID"/"Middle" : - 8 – + 8

Middle Quality Factor

Adjust the middle quality factor.
Display and setting:
"Middle Q" : 1.0 / 2.0

Treble Centre Frequency

Adjust the centre frequency of the treble.
Display and setting:
"TRE FRQ"/"TRE F" : 10.0 / 12.5 / 15.0 / 17.5 kHz

Treble Level

Adjust the treble level.
Display and setting:
"TRE"/"Treble" : - 8 – + 8
— 14 —