Tuner Setup; Tv Setup - Kenwood DDX8036BT Instruction Manual

Tuner Setup

Tuner Setup
You can set Tuner related parameters.
1 Display the Tuner Setup screen
> >
Touch [ ] [
SETUP]. (page 67)
2 Set each item
[NEWS] Sets a news bulletin interrupt
time. ( "OFF")
1
[AF]* When station reception is poor,
automatically switches to the station
that is broadcasting the same program
over the same RDS network. (
[Regional]* 1 Sets whether to switch to
the station only in the specific region
using the "AF" control. (
1
[Auto TP Seek]*
information station reception is poor,
automatically searches for a station that
can be received better. (
[Language Select] Selects a display
language for the PTY function.
( "English (en)")
[Antenna Control] Allows you to turn
off the RDS function to prevent the
motor-driven antenna from extending.
( "ON")
⁄
* 1 Only when receiving the FM broadcast.
DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM
> >
] [TUNER
"ON")
"ON")
When traffic
"ON")

TV Setup

TV Setup
The TV signal receiving areas can be set.
(with the optional accessory TV Tuner
connected only)
1 Display the TV SETUP screen
> >
Touch [ ] [
(page 67)
2 Set each item
[On Screen TV] Sets an on-screen
display of the TV screen.
( "Auto") (with the optional accessory
TV tuner connected only)
"Auto": Information is displayed for 5
seconds when updated.
"OFF": Information is displayed when
you touch on the screen.
3 Setting up TV (only with KTC-V300P
(optional accessory) connected)
Example : TV1 Area screen
Sets the present TV1 or TV2 receiving
area.
> >
] [TV SETUP].
English 91