Camera Setup - Kenwood DDX8036BT Instruction Manual

Camera Setup

Camera Setup
You can set Camera parameters.
1 Display the Camera Setup screen
> >
Touch [ ] [
SETUP]. (page 67)
2 Set each item
[Rear Camera] Selects the type of rear
camera to use. (
"CMOS-300": When the CMOS-300 with
ID 1 set is connected.
"Other": When the other camera is
connected.
[R-CAM Interruption] Sets a method
to switch to the rear view camera video
display. ( "OFF")
"ON": Switches to the rear view camera
video display when engaging the shift
knob of car to "Reverse".
"OFF": Switches to the rear view camera
video display when engaging the shift
knob of car to "Reverse" and then
pressing the [AUD] button for longer
than 1 second.
The function of the [AUD] button
needs to be set to "CAM" in [AUD Key
Longer than 1 Second] beforehand.
[R-CAM Settings] Adjusts the CMOS-
300 with ID 1 set. For details, see the
option manual.
DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM
> >
] [Camera
"Other")
[Front Camera] Turn this setting on
when the CMOS-300 with ID2 set is
connected. ( "OFF")
[F-CAM Settings] Adjusts the CMOS-
300 with ID 2 set. For details, see the
option manual.
Next page 3 Next page 3
English 81