Dvd Language Setup - Kenwood DDX8036BT Instruction Manual

a Dolby Digital software.
The operation is available during the
play stop mode.
[Angle Mark] Sets an angle mark
display. ( "ON")
1
[Screen Ratio]*
display mode. (
"16:9": Displays wide pictures.
"4:3 LB": Displays wide pictures in the
Letter Box format (having black stripes
at the top and bottom of screen).
"4:3 PS": Displays wide pictures in the
Pan & Scan format (showing pictures
cut at the right and left ends).
[Parental Level]*
Lock screen. (
See <DVD Parental Level Setup> (page
88).
[Disc SETUP] Makes the settings related
to the disc media. See <Disc Setup>
(page 89).
[Stream Information] Displays the
present source information.
The stream (Dolby Digital, dts, Linear
PCM, MPEG, MP3, WMA or AAC) is
displayed. (DNX7/ DDX7 series only)
⁄
• * Disabled when a DVD is being played.

DVD Language Setup

DVD Language Setup
Selects a language you use for the speech
and menus.
1 Display the DVD Setup screen
> >
Touch [ ] [
(page 67)
DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM
Selects the screen
"16:9")
1 Displays the Parental
"OFF")
> >
] [DVD SETUP].
2 Select the language item to set
3 Enter a language code
See <DVD Language Codes> (page 102)
and select the desired language.
1 1 1
1 Enters a language code.
[Cancel] Cancels the language setup
and returns to the "DVD SETUP" screen.
[Enter] Sets the language and returns
to the "DVD SETUP" screen. (It appears
after you have entered a language
code.)
[Original] Sets the DVD's original
language (only when setting an audio
language).
[Clear] Clears the language code.
4 Set the language you use
Next page 3 Next page 3
English 87