Device Administration - D-Link DAP-1150 User Manual

Section 3 - Configuration
This window will allow you to change the Administrator password. You can also enable Remote Management.
Administrator
Enter a new Login Name for the Administrator account.
Login Name:
Administrator
Enter a new password for the Administrator Login Name
Password:
and then retype the new password in the Confirm Password
textbox. The administrator can make changes to the
settings.
Remote management allows the DAP-1150 to be configured
Enable Remote
Management: from the Internet by a web browser. A username and
password is still required to access the Web-Management
interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator
tasks. This feature enables you to perform Administrator
tasks from the remote (Internet) host.
IP Allowed to
The Internet IP address of the computer that has access
Access:
to the AP. If you input an asterisk (*) into this field, then
any computer will be able to access the AP. Putting an asterisk (*) into this field would present a security risk and is not
recommended.
Port: The port number used to access the DAP-1150. For example: http://x.x.x.x:8080 whereas x.x.x.x is the LAN IP address of
the DAP-1150 and 8080 is the port used for the Web-Management interface.
D-Link DAP-1150 User Manual

Device Administration

25