Lan Setup - D-Link DAP-1150 User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the AP and to configure the DHCP settings.
AP IP Address:
Enter the IP address of the AP. The default IP
address is 192.168.0.50.
If you change the IP address, once you click
Apply, you will need to enter the new IP
address in your browser to get back into the
configuration utility.
Default Subnet
Enter the Subnet Mask. The default subnet
Mask:
mask is 255.255.255.0.
Local Domain
Enter the Domain name (Optional).
Name:
Enable DNS
Check the box to transfer the DNS server
Relay:
information from your ISP to your computers.
If unchecked, your computers will use the AP
for a DNS server.
Refer to the next page for DHCP information.
D-Link DAP-1150 User Manual

LAN Setup

22