D-Link DAP-1150 User Manual page 35

Section 3 - Configuration
1. To enable wireless security on the AP, use the
drop-down menu to select the desired option.
To enable WEP, select Enable WEP Wireless
Security (basic).
2. Next to Authentication, select either Open
or Shared Key. Shared Key provides greater
security.
3. Select either 64Bit or 128Bit encryption from the
drop-down menu next to WEP Encryption.
4. Next to Default Key Type, select WEP Key 1 and
enter a WEP key that you create. Make sure you
enter this key exactly on all your wireless devices.
You may enter up to four different keys either using
Hex or ASCII. Hex is recommended (letters A-F and
numbers 0-9 are valid). In ASCII all numbers and
letters are valid.
5. Click Save Settings to save your settings. If you
are configuring the AP with a wireless adapter,
you will lose connectivity until you enable WEP
on your adapter and enter the same WEP key as
you did on the AP.
D-Link DAP-1150 User Manual
NOTE:
In Repeater mode, use the same wireless security method of
root AP is reguired.
35