Lan Setup - D-Link DAP-1150 User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Router IP
Enter the IP address of the router. The default
Address:
IP address is 192.168.0.50.
If you change the IP address, once you click
Apply, you will need to enter the new IP address
in your browser to get back into the configuration
utility.
Default Subnet
Enter the Subnet Mask. The default subnet mask
Mask:
is 255.255.255.0.
Local Domain
Enter the Domain name (Optional).
Name:
Enable DNS
Check the box to transfer the DNS server
Relay:
information from your ISP to your computers. If
unchecked, your computers will use the router
for a DNS server.
Refer to the next page for DHCP information.
D-Link DAP-1150 User Manual

LAN Setup

63