Filling The Cleaning Agent Tanks (Only When Required) - Ryobi R2-PWWDV-G Original Instructions Manual

High-pressure cleaning

4.2 Filling the cleaning agent tanks (only when required)

CAUTION: Danger of material damage! Only use cleaning agents which are expressly suited for use with
high-pressure cleaners. Domestic cleaners, acids, soaps, bleaches, thinners, solvents, alcohol, flammable
substances, mineral cleaning agents and cleaning agents containing solid matter could damage the
integrated pump. Always comply with the instructions of the cleaning agent manufacturer. Many cleaning
agents, for example, have to be thinned before they can be used.
18
1. If you have not done so already, pull the appliance plug from the socket.
2. Release the rubber lid of the cleaning agent tank (Fig. 18).
3. Push the 'PUSH' button on the back of the high-pressure cleaner (Fig. 19/1).
4. Take hold of the tank and pull it out of its holder whilst continuing to hold down the 'PUSH' button.
5. Fill the tank with cleaning agent.
NOTE: If you want to be sure that nothing spills, use a funnel.
6. Push the tank back into its holder firmly. You will feel and hear it snap into place.
7. Thread the hose into the tank and pull the rubber lid over the tank.
8. Proceed in exactly the same way for the second cleaning agent tank.
The appliance is now ready for high-pressure cleaning with the addition of cleaning agent.
24
19