Concerning The Power Supply - Ryobi R2-PWWDV-G Original Instructions Manual

General Safety Information

2.3 Concerning the power supply

The appliance is operated with electrical power which means there is always a risk of electric shock.
Consequently, particularly comply with the following instructions:
Never touch the appliance plug with wet hands.
Always pull directly at the appliance plug if you want to disconnect the appliance from the mains. Never pull
the power cord, it might break.
Take care that the power cord is not kinked, pinched, or rolled over and ensure it does not come into contact
with heat sources.
Only connect the appliance to 3-pole safety sockets.
Never immerse the appliance in water or other liquids.
Only operate the appliance if your mains voltage is the same as that indicated on the appliance's type plate.
The wrong voltage can destroy the appliance.
Only use extension cables whose plugs and sockets are water tight. In addition, extension cables must have a
conductor cross section of at least 1.5 mm² (or 2.5 mm² from 10 m) and be designed for the power input of
the appliance.
The extension cable and the plug-in coupling must never be in puddles of water. Do not use multiple sockets
or cable reels.
If the power cord of this appliance is damaged, it must be replaced by the manufacturer, their authorised
service representative or a similarly qualified person to avoid danger.
Before you clean or maintain the appliance, switch off the appliance and pull the appliance plug from the socket.
13