Opening/Closing The Monitor And Power Switch - Kenwood KVT-717DVD Instruction Manual

Opening/Closing the Monitor and Power Switch

Open the monitor
Close the monitor
Turn the power on
Hold down the [SRC] key more than
one second to turn it off.
Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components,
•
you may be hurt or the equipment may be damaged.
• Do not try to open or close the monitor by hand.
You can automatically open or close the monitor when you turn on or off the ignition key (page 59).
•
• If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement is
canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also canceled
by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] key again.
8
|
English
[OPEN/CLOSE] key
[SRC] key