Program Playback - Magnavox MDR557H Owner's Manual

Program Playback

You can program the disc to play back in your desired
order.
1) Press [MENU].
2) Use [K / L] to select "DISC Playback Mode", then
press [OK].
"DISC Playback Mode" menu will appear.
3) Use [K / L] to select "Program Play", then press
[OK].
4) Use [K / L] to select a desired track, then press [OK]
or [B].
DISC Playback Mode
Program Play
-- -- -- --
-- -- -- --
-- -- -- --
-- -- -- --
-- -- -- --
Repeat this step until you program all the desired
tracks.
5) Press [PLAY B].
DISC Playback Mode
Program Play
09 04 10 06
-- -- -- --
-- -- -- --
-- -- -- --
-- -- -- --
Program playback will start.
Note(s)
• To erase tracks you selected, press [CLEAR] at step 4.
• You can program up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. "OFF" appears on the TV
screen.
• Program information will be retained until you turn
the unit to the standby mode or open the disc tray.
• You may also select a desired track using
[the Number buttons] at step 4.
SPECIAL PLAYBACK
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
Total 0:00:00
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
Total 0:31:07
Playing Back the Autostart Recording
By playing back the autostart recording, you can pause
or go back the TV program you are currently watching.
For the autostart recording refer to "AUTOSTART
RECORDING" on page 46.
To pause and resume the TV program:
1) When watching TV program through this unit's
tuner, press [PAUSE F].
TV program will be paused and sound will be muted.
2) Press [PLAY B] to resume the TV program you were
watching from where you have paused.
To rewind or fast forward the TV program:
When watching TV program through this unit's
tuner, press [H], [E], [REPLAY ], [G], [D] or
[SKIP ].
• While playing back the autostart recording, pressing
[H] or [G] skips playback point 5 minutes
backward or forward.
To go back to the specific time:
1) When watching a TV program through this unit's
tuner, press [DISPLAY], then press [OK].
2) Use [K / L / { / { B] or [the Number buttons] to enter
a desired time, then press [OK].
• While playing back the autostart recording, press
[STOP C] to cancel the playback.
• When watching TV program or while playing back the
autostart recording, press [DISPLAY] once to display
the autostart recording information. Refer to
"Autostart Recording Information" on page 23.
• Noise reduction and zoom functions are available
while playing back the autostart recording.
Note(s)
• While playing back the autostart recording, you
cannot change the channels.
• While playing back the autostart recording, you
cannot change the DTV audio language.
• If you change to DVD mode or if the timer recording
starts while playing back the autostart recording, the
playback will be stopped.
• When this unit turns on for the timer recordings, the
autostart recording will not be performed.
• For the contents of the autostart recording, you
cannot change the TV audio.
EN EN 77