Rear Panel - Magnavox MDR557H Owner's Manual

Rear Panel

1 2
VIDEO VIDEO
IN OUT
L
R
IN
AUDIO IN
ANTENNA S-VIDEO AUDIO OUT
( L1 )
12 11 10 9
1. ANTENNA IN jack
Use to connect an Antenna / Cable Box / Satellite
Receiver for RF Pass Through only.
2. VIDEO IN jack (L1)
Use to connect External device with an RCA video
cable.
3. VIDEO OUT jack
Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
4. HDMI OUT jack
Use an HDMI cable to connect to a display with an
HDMI compatible port.
5. AC Power Cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
shut down the unit.
6. DIGITAL AUDIO OUTPUT (COAXIAL) jack
Use to connect an AV receiver, Dolby Digital decoder
or other device with a digital audio coaxial input jack
with a digital audio coaxial cable.
7. S-VIDEO OUT jack
Use to connect the S-Video input on a TV monitor, AV
receiver or other device with an S-Video cable.
FUNCTIONAL OVERVIEW
4
3
Y
L
R
OUT
COAXIAL
S-VIDEO
8 7 6
8. COMPONENT VIDEO OUTPUT jacks
Use to connect a TV monitor with component video
inputs with a component video cable.
9. AUDIO OUT jacks
Use to connect a TV monitor, AV Receiver or other
devices with a set of RCA audio cables.
10. S-VIDEO IN jack (L1)
Use to connect an External device, by an S-Video
cable.
11. AUDIO IN jacks (L1)
Use to connect an External device with a set of RCA
audio cables.
12. ANTENNA OUT jack
Use to connect an RF coaxial cable to pass the signal
from the ANTENNA IN to your TV.
Note(s)
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have an RF modulator.
5
AC plug
EN EN 11