Before You Start - Magnavox MDR557H Owner's Manual

Finding the Viewing Channel on your TV
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
Input Mode Names for Common TV Brands (Example)
Admiral AUX
Curtis LINE1, LINE2,
Mathis 00, 90, 91, 92, 93
GE INPUT, TV/VCR,
00, 90, 91, 92, 93
Hitachi INPUT, AUX
JVC VIDEO, VIDEO 1,
VIDEO 2, VIDEO 3
Kenwood AUX
LXI-Series 00
Magnavox AUX CHANNEL
22 EN EN

BEFORE YOU START

Panasonic TV/VIDEO
RCA INPUT, TV/VCR,
00, 90, 91, 92, 93
Samsung TV/VIDEO
Sanyo VIDEO
Sharp 00
Sony VIDEO1, VIDEO2,
VIDEO3
Toshiba TV/GAME
Zenith 00
1
After you have made all the
necessary connections, press
[STANDBY/ON y y ] to turn on the unit.
2
Turn on your TV.
• If connected to your VCR make sure it is
switched Off or in Standby mode before
proceeding.
3
Locate the Video/Input button on the
TV's remote control that access the
external Input Channel. Press until
you see the "Initial Setup" menu on
the screen.
Initial Setup
Language
English
Français
Español
You may try to access the Video/Input mode by:
-Locate the input button on the TV's Front, Top
or Side.
-Locate the Input Mode in the TV's Setup Menu.
If you cannot locate the Video/Input button on
the TV's remote control, refer to the TV's user
Manual or "Input Mode Names for Common TV
Brands (Example)".
If more than 10 minutes has passed, you may
see the MAGNAVOX screen saver.
4
Proceed to step 2 in "INITIAL
SETTING" on page 28.
WARNING:
• Please finish the Initial Setup before attempting to
use the device. The Device may not function
correctly without an Initial Setup.
Note(s)
• Video input selection varies for different brand's
models of TVs.
• Consult your TV manufacturer if none of the above is
successful.