Connecting The Aerial And Vcr; Connecting The Power Cord To The Ac Outlet - JVC InteriArt LT-26C31BC Service Manual

Setting up your TV

Connecting the aerial and VCR

• The connecting cables are not provided.
• For further details, refer to the manuals provided with
the devices to be connected.
If connecting a VCR, follow A → B → C.
If not connecting a VCR, follow 1.
To operate T-V LINK functions, a T-V LINK compatible
VCR must be connected to the EXT-2 terminal on the TV.
For details about T-V LINK functions, see "T-V LINK
FUNCTIONS" on page 8.
• A video can be viewed from the VCR without
performing C. For details, refer to your VCR instruction
manual.
• To connect additional external devices, please see
"Connecting the external devices" on page 33.
• To connect additional audio equipments, see
"Connecting Speakers/Amplifier" on page 34.
• When a decoder is connected to a T-V LINK compatible
VCR, set the DECODER (EXT-2) function to ON. For
details, see "Using the DECODER (EXT-2) function"
on page 32. Otherwise, you will not be able to view
scrambled channels.
without terminal covers
S
L
R
EXT-3
EXT-2
(S )
EXT-1
AUDIO
OUT
L
R
21-pin
SCART
Cable
VCR
AV IN/OUT
Terminal
6
Aerial
R
L
Y
Pb
Pr
EXT-4
75-ohm
Coaxial
Cable
75-ohm
Coaxial
Cable
To Aerial
Input
To Aerial
Output
Connecting the power cord to the AC
outlet
Insert the AC plug on the power cord from the TV into AC
outlet. The power lamp will light and the TV will enter
standby mode.
Caution
• Operate only from the power source specified (AC 110
– 240 V, 50/60 Hz) on the unit.
• Remove the AC plug from the outlet to completely
disconnect the TV from the power supply.