JVC InteriArt LT-26C31BC Service Manual page 14

3.1.10 REMOVING THE LCD PANEL (Fig.3-1-10C, Fig.3-1-10A, Fig.3-1-10B)
• Remove the STAND ASS'Y.
• Remove the REAR COVER.
• Remove the POWER CORD.
• Remove the RECEIVER PWB.
• Remove the FRONT CONTROL PWB.
• Remove the FRONT SENSOR PWB.
• Remove the VIDEO PWB.
• Remove the MI-COM & DIST PWB
• Remove the POWER PWB.
(1) Remove the 2 screws [a], and remove the 2 CENTRE
FRAMES.
(2) Remove the 2 screws [b] and 2 screws [c], then remove the
RIGHT FRAME.
(3) Remove the 2 screws [b] and 2 screws [c], then remove the
LEFT FRAME.
(4) Remove the 2 screws [d], and remove the TOP FRAME.
(5) Remove the 3 screws [e] and 2 screws [f], then remove the
BOTTOM FRAME.
(6) Remove the 8 screws [g] and 2 screws [h], then remove the
LCD PANEL.
NOTE:
The LCD PANEL is fixed to the FRONT PANEL (at the
back side) by using double-side adhesive tapes. To
remove the LCD PANEL, remove the adhesive tape on
the FRONT PANEL slowly.
1-14 (No.YA169)
CENTRE
FRAME
a
X
P
Q
Fig.3-1-10A
b
RIGHT
FRAME
TOP
FRAME
c
d
e
Fig.3-1-10B
g
h
g
Fig.3-1-10C
a
LEFT FRAME
c
b
BOTTOM
FRAME
f
g
h
g