Adjust The Volume; Watch Images From External Devices; Muting The Sound - JVC InteriArt LT-26C31BC Service Manual

Wide lcd panel television
Table of Contents

Advertisement

Use the PR LIST:
1 Press the h (Information) button to display the
PR LIST
Pressing the h (Information) button changes the display
as follows:
PR LIST
PR
ID
AV
BBC1
01
02
03
04
05
06
07
08
No indication
09
TV
OK
-10
+10
D0011-EN
2 Press the 5 and 6 buttons to choose a
Programme number (PR). Then press the a
button
• For Programme numbers (PR) with the CHILD
LOCK function set, the n (CHILD LOCK) mark is
displayed next to the Programme number (PR) in the
PR LIST.
• You cannot use the 6 buttons to choose a
Programme number (PR) with the CHILD LOCK
function set.
• Even if you try to choose a Programme number (PR)
with the CHILD LOCK function set, the n (CHILD
LOCK) mark will appear, and you cannot watch the
TV channel. To watch the TV channel, see "CHILD
LOCK" on page 25.

Adjust the volume

Press the r q buttons to adjust the volume.
The Volume indicator appears and the volume changes as
you press the r q buttons.
• The headphone volume is adjusted with the
"HEADPHONE" menu (see page 22).

Muting the sound

Press the l (muting) button to turn off the
sound.
Pressing the l (muting) button again restores the previous
volume level.

Watch images from external devices

Use the o button:
Press the o button to choose an EXT
terminal.
TV mode
Programme
EXT-1
numbers
PR 1 – PR 99
E1
EXT-4
E4
Use the p p buttons:
Press the p p buttons to choose an EXT
terminal.
12 : 00
EXT modes
EXT-2
or
E2
S2
EXT-3
or
E3
S3
Remote control buttons and functions
Use the PR LIST:
1 Press the h (Information) button to display the
PR LIST
2 Press the 5 and 6 buttons to choose an
EXT terminal. Then press the a button
• The EXT terminals are registered after the
Programme number PR 99.
• You can choose a video input signal from the S-
VIDEO signal (Y/C signal) and regular video signal
(composite signal). For details, see "S-IN (S-VIDEO
input)" on page 23.
• If you do not have a clear picture or no colour
appears, change the colour system manually. See
"COLOUR SYSTEM" on page 20.
• This TV set has a function which can automatically
change over the input according to a special signal
output from an external device. (The EXT-4 terminal
does not support this function.)
To return to a TV channel:
Press the b button or the Number buttons.
To use the Programme number PR 0 (AV):
When the TV and VCR are connected only by the Aerial
cable, choosing the Programme number PR 0 (AV) allows
you to view images from the VCR. Set the VCR RF channel
to the Programme number PR 0 (AV) manually. For details,
see "EDIT/MANUAL" on page 28.
Pressing the o button changes the choice as follows:
TV mode
Programme
PR 0
EXT-1
numbers
PR 1 – PR 99
E1
EXT-4
E4
• The VCR RF channel is sent as the RF signal from the
VCR.
• Also refer to your VCR instruction manual.
EXT modes
EXT-2
or
E2
S2
EXT-3
or
E3
S3
11

Advertisement

Chapters

Table of Contents
loading

Table of Contents