Table of Contents
Advertisement
4069-5XX/7XX
User Status Screens
User Status Screens
Ready
Ready
<Fax Status>
Ready/Hex
Power Saver
Power Saver
<Fax Status>
2-24
Service Manual
Status
The printer is ready to
receive and process
data
or
The printer will display
the FAX status.
The printer is ready and
HEX Trace is active,
which is known as HEX
Trace Ready.
When in the power saver
mode, the printer will
display this screen
instead of the Ready
screen. When a job is
received, the power
saver screen remains
displayed until the
printer exits the power
saver mode and warms
up the printer.
The printer has been
configured to receive or
send FAX. This screen
is displayed.
Action
Press Menu> or
<Menu to take the
printer out of Ready
and enter all the
Menus except the
TESTS MENU (Busy
State).
Press Menu> or
Menu< to take the
printer out of Ready
and enter the TESTS
MENU (Busy State).
Press Select for the
values. Press Menu>
until Reset Printer is
on the second line of
the display. Press
Select to Reset the
printer.
Press Menu > or
Menu< to take the
printer offline and
access the Ready
Menu Group.
or
Press GO to take the
printer out of power
saver and initiate a
printer warm up cycle.
or
Press Stop to take the
printer offline. The Not
Ready message is
displayed, no more
data is processed.
The Go button must
be pressed to return
the printer to the
previous state.
Advertisement
Table of Contents
