11-1-2. Cabling and Setting of Remote Controller Control
2-remote controller control
(Controlled by two remote controllers)
One or multiple indoor units are controlled by two
remote controllers.
(Max. 2 remote controllers are connectable.)
• 1 indoor unit is controlled by 2
remote controllers
Remote controller
switch (Master)
Sold separately
A
B
A
B
Indoor unit
1
2
3
1
2
3
nit
Outdoor u
(Setup method)
One or multiple indoor units are controlled by two
remote controllers.
(Max. 2 remote controllers are connectable.)
Remote controller
switch (Sub)
Sold separately
A
B
Remote controller
cables (Procured locally)
Terminal block for
remote controller cables
<Wired remote controller>
How to set wired remote controller
as sub remote controller
Change DIP switch inside of the rear side of the
remote controller switch from remote controller
master to sub. (In case of RBC-AMT31E)
Remote controller (Inside of the rear side)
1 2
– 64 –
1 2
Sub remote
controller
Master remote
controller
1 2
DIP switch