HP Photosmart M22 User Manual page 122

Problem
My image is
too dark
(continued).
My image is
grainy.
Downloaded From camera-usermanual.com HP Manuals
HP Photosmart M22/M23 User's Manual
122
Possible Cause
There was not
enough light.
A light is behind
the subject.
Your finger
blocked the
flash.
The Display
Brightness
needs to be
adjusted.
The ISO Speed
setting was too
high.
Solution
• Use Image Advice (see
page 72).
• Wait for natural lighting
conditions to improve.
• Add indirect lighting.
• Use the flash (see
page 40). This is called
fill-flash.
• Increase the EV
Compensation (see
page 56).
• Use Adaptive Lighting (see
page 52).
• Use the Flash On
(see page 40) to brighten
the subject.
• Increase the EV
Compensation (see
page 56).
• Use Adaptive Lighting (see
page 52).
Be sure to move your fingers
away from the flash when you
take a picture.
Set the Display Brightness in
the Setup Menu to Medium or
High (see page 94).
• Use Image Advice (see
page 72).
• Use a lower ISO Speed
setting (see page 59).
setting