HP Photosmart M22 User Manual page 120

Problem
My image is
blurry
(continued).
My image is
too bright.
Downloaded From camera-usermanual.com HP Manuals
HP Photosmart M22/M23 User's Manual
120
Possible Cause
The camera
should have
been set to the
Macro
shooting mode.
The subject
moved or you
moved the
camera while
you took the
picture.
The camera
focused on the
wrong thing, or
was unable to
focus.
The flash
provided too
much light.
You used EV
Compensation
when you
should not have.
Solution
Set the camera to the Macro
, shooting mode and try
taking the picture again (see
page 42).
• Set the flash to Auto Flash
or Flash On
the shooting mode to Action
.
• Hold the camera with two
hands as you press the
Shutter button or use a
tripod. Watch for the
icon in the Image Display
(this means that it is almost
impossible to hold the
camera steady, and you
must use a tripod).
• Make sure the focus
brackets turn green before
taking the picture (see
page 36).
• Use Focus Lock (see
page 38).
• Use Image Advice (see
page 72).
• Turn the flash off (see
page 40).
• Move back from the subject.
Set EV Compensation to 0.0
(see page 56).
and set