Configuring The Camera As A Disk Drive - HP Photosmart M22 User Manual

Configuring the Camera as a Disk Drive

You can set up your camera to function as a disk drive when
it is connected to your computer, so you can transfer images
without using the HP Image Zone software.
NOTE: You may be unable to use this method with
Windows 98 computers.
1. Set your camera to act as a Disk Drive (you only need to
do this step once):
a. Turn the camera on, press the
the
b. Use the
then use the
c. Press the Live View/Playback
the Setup Menu.
2. Connect the camera to your computer using the USB
cable.
3. At this point, the process is the same as described in
Using a Memory Card Reader on page 109. On
Windows computers, the camera will appear as a
removable disk in the Windows Explorer screen. On
Macintosh computers, either the Image Capture or iPhoto
application will launch automatically.
4. When you have finished transferring images from the
camera to the computer, simply disconnect the camera
from the computer. If your computer is running Windows
2000 or XP and you get an Unsafe Removal warning,
disregard the warning.
NOTE: On Macintosh computers, if either Image Capture or
iPhoto do not launch automatically, look on the desktop
for a disk drive icon with the label HP_M2X. For more
information about how to copy files, visit Mac help.
Downloaded From camera-usermanual.com HP Manuals
HP Photosmart M22/M23 User's Manual
112
button to navigate to the Setup Menu
button to highlight the USB menu option,
button to select Disk Drive.
button, then use
.
button to exit