HP Photosmart M22 User Manual page 119

Problem
The camera
does not take
a picture when
I press the
Shutter button
(continued).
My image is
blurry.
Downloaded From camera-usermanual.com HP Manuals
Possible Cause
The camera is
set to the Macro
shooting
mode and
cannot take a
picture until it
finds focus.
The camera is
still saving the
last picture
you took.
The light is low
and the flash
is set to
or
Flash Off
.
Night
Troubleshooting and Support
Solution
• Re-focus the camera (try
using Focus Lock; see
page 38).
• Make sure the subject of the
picture is within the Macro
(close-up) range (see
page 42).
Wait a few seconds for the
camera to finish processing the
last image before taking
another picture.
• Use Image Advice (see
page 72).
• In dim light, the camera
requires a longer exposure.
Use a tripod to hold the
camera steady, improve
lighting conditions, or set
the flash to Auto Flash
see page 40).
• Hold the camera with two
hands as you press the
Shutter button or use a
tripod. Watch for the
icon in the Image Display
(this means that it is almost
impossible to hold the
camera steady, and you
must use a tripod).
119