Equalizer Control - Kenwood eXcelon KDC-X789 Instruction Manual

General features

Equalizer Control

1
Select the source for adjustment
Press the [SRC] button.
2
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "EQ"/"SYS.Q"
is displayed above the [3] (KDC-X889/MP828)/[1]
(KDC-MP7028/MP728/X789/MP628) button.
Refer to <Notes on Multi-function Key System>
(page 9).
3
Enter Equalizer Control mode
Press the [3] ("EQ")/[1] ("SYS.Q") button.
• When "2 ZONE" of <Audio Setup> (page 13) is ON,
you cannnot select "EQ". (KDC-X889/MP828 only)
4
Select the Equalizer Control item for
adjustment
Press the [1] — [3]/[5] button.
Multi-function key operation
[1] "SYS.Q"
[2] "F"*
[3] "R"*
[5] "Preset"* [1] "CALL"
[2] "MEM"
• * Function of the KDC-X889/MP828
• "Preset": You can store an adjusted equalizer control
value by selecting "MEM". Refer to <Memory
mode> (page 18). Also, you can recall it by
selecting "CALL". Refer to <Memory Recall
mode> (page 18).
5
Adjust the Equalizer control item
System Q Setting (Sound Type)
Push the Control knob to [4] or [¢].
Each time the knob is pushed, the setting
switches as shown below.
KDC-X889/MP828
Sound setting Display
User memory "USER"
Natural "NATURAL"
Rock "ROCK"
Pops "POPS"
Easy "EASY"
Top 40 "TOP 40"
Jazz "JAZZ"
16
|
English
Equalizer Control Item
System Q Setting
Equalizer Front Setting
Equalizer Rear Setting
Call mode
Memory mode
KDC-MP7028/
MP728/X789/MP628
Sound setting Display
User memory "USER"
Rock "ROCK"
Pops "POPS"
Easy "EASY"
Top 40 "TOP 40"
Jazz "JAZZ"
Natural "NATURAL"
memory
• User :
The values set on the <Audio Control> (page 10/12).
• Each setting value is changed with the <Speaker
Setting> (KDC-MP7028/MP728/X789/MP628) (page
13) / <Sound Management system> (KDC-X889/
MP828) (page 15).
First, select the speaker type with the Speaker setting.
Equalizer Front Setting/
Equalizer Rear Setting (KDC-X889/MP828
only)
1 Select a frequency band you wish to adjust
Press the [2] ("F") or [3] ("R") button.
Each time the button is pressed, it switches
between "Band 1" and "Band 4".
2 Select the adjustment items for Equalizer.
Push the Control knob to [FM] or [AM].
Each time the button is pressed, the items that
can be adjusted switch as shown below.
3 Adjust the Equalizer.
Push the Control knob to [4] or [¢].
Each time the knob is pushed, the setting
switches as shown below.
Equarizer adjustment item
Equalizer Front Frequency/
Equalizer Rear Frequency
Equalizer Front Level/
Equalizer Rear Level
Equalizer Front Quality/
Equalizer Rear Quality
• The frequency which can be selected by each
Frequency band is shown below.
Band Frequency
Band1 60/ 80/ 100/ 120/ 160/ 200 (Hz)
Band2 250/ 315/ 400/ 500/ 630/ 800 (Hz)/ 1 (kHz)
Band3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 (kHz)
Band4 5/ 6.3/ 8/ 10/ 12.5/ 16 (kHz)
• To get the best sound, first set the Cabin Setting
and Speaker Select Front/Rear parameters using the
<Sound Management system> (page 15).
6
Exit Equalizer Control mode
(KDC-X889/MP828 only)
Press the [6] ("RTN") button.
Range
Refer to the followings.
–9 — +9
0.25/ 0.50/ 1.00/ 2.00