Installing The Switch; Included Parts - HP J9661A Installation And Getting Started Manual

Installing the Switch

This chapter provides installation information for the V1410-8 Switch,
V1410-16 Switch, V1410-24 Switch, and V1410-24-2G Switch.

Included Parts

The switches have the following components:
Documentation kit
■
• Read Me First
• Switch Quick Setup Guide
• Safety and Regulatory information
• Software End User License and Hardware Warranty information
Four rubber feet
■
■ Wall/table-mount accessory kit:
Kit number 5066-0621
Contains:
• three 3/4" (20-mm M4) screws for
wall and under-table mounting
• three wall anchors
• cable tie for power cord
■ Rack-mount accessory kit:
V1410-16 Switch
Kit number 5066-0622
Contains:
• two mounting brackets
• eight 8-mm M4 screws to attach the
mounting brackets to the switch
• four 5/8-inch number 12-24 screws to
attach the switch to a rack
V1410-24 Switch
V1410-24-2G Switch
Kit number 5066-0623
Contains:
• two mounting brackets
• eight 8-mm M4 screws to attach the
mounting brackets to the switch
• four 5/8-inch number 12-24 screws to
attach the switch to a rack
2
2-1