Installing the Switch
Installation Procedures
2-14
Using a Kensington Security Cable
To prevent unauthorized removal of the switch, you can use a Kensington Slim
MicroSaver security cable (not included) to attach the switch to an immovable
object.
Figure 2-9. Using a security cable with the switch
4. Connect the Switch to a Power Source
1.
Plug the AC/DC adapter's power cord into the switch, and then plug the
AC/DC power adapter into a nearby AC power source.
Figure 2-10. Connecting power to the switch
2.
Re-check the LEDs during self test. See
"LED Behavior" on page
2-8.