4-10. FUNCTIONS OF OTHER BUTTONS
Table 4-3.
Button
Turns recording on/off when pressed during
r REC
continuous playback.
§ (MD)
Disc eject
Note: The erasing-protection tab in not detected during the test mode.
Recording will start regardless of the position of the erasing-protec-
tion tab when the r REC button is pressed.
4-11. TEST MODE DISPLAYS
Each time the § (CD) button pressed, the display changes in the
following order.
Mode
display
Address display
ADIP address
display
Change over the display with the
POWER button.
Auto gain
display
Note: Auto gain display and IVR display are not used in servicing.
Contents
Error rate
display
SUB Q address
display
IVR
display
1. MODE display
Displays "TEMP ADJUST", "CPLAY MODE", etc..
2. Error rate display
Error rates are displayed as follows.
C1=
AD=
C1= : Indicates C1 error
AD= : Indicates ADER
3. Address display
Address are displayed as follows.
h=
a=
(MO groove)
With this display, if POWER button is pressed, the following
will be displayed.
h=
s=
(MO pit and CD)
h=: Header address
s=: SUB Q address
a=: ADIP address
Note: "—" is displayed when the address cannot be read.
4. Auto gain display
Auto gain are displayed as follows.
AG F=
T=
F= Focus auto gain collection value
T= Tracking auto gain collection value
4-12. MEANINGS OF OTHER DISPLAYS
Display
REC
Recording mode on
DISC
High reflection rate disc
– 18 –
Table 4-4.
Contents
Light
Off
Recording mode off
Low reflection rate disc