Start Time - Kenmore 625.3835 Use And Care Manual

SET RECHARGE (REGENERATION) START TIME
If you completed the previous step, the words "RE-
CHARGE TIME" should show in the display. Otherwise,
press the SELECT button several times until they do.
-J,rJ rJ AM
C.uu
RECHARGE
TIME
Figure 19
1. The softener's default recharge start time is 2:00 AM.
This is normally a time of day when water is not
being used in the household. Hard water bypasses
the softener if the household draws water during the
recharge cycle. If a different recharge start time is
desired, press the /X UP or V DOWN buttons to
change the time, in 1-hour increments. Be sure AM or
PM is correct.
2. When the desired recharge start time is displayed,
press the SELECT button, and the display will return
to the normal run (time of day) screen.
oo_1 -t. i-I
i 2. rC
WATER FLOW
PM
Figure 20
Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www.kenmorewaterocom
13