Driving systems
198
Ball coupling
:
Red guide line at a distance of approx-
;
imately 12 in (0.30 m) from the ball cou-
pling
Trailer drawbar marker assistant
=
Trailer drawbar
?
Symbol for the "Coupling up a trailer"
A
function
Select symbol A using the COMAND con-
X
troller, see COMAND.
The "Coupling up a trailer" function is selec-
ted. The distance specifications now only
apply to objects that are at the same level
as the ball coupling.
Back up carefully, making sure that trailer
X
drawbar marker assistant = points
approximately in the direction of trailer
drawbar ?.
Back up carefully until the trailer draw-
X
bar ? reaches red guide line ;.
Couple up the trailer (
X
360° camera
General notes
The 360° camera is a system consisting of
four cameras.
The system analyzes images from the follow-
ing cameras:
Rear view camera
R
Front camera
R
Two cameras in the exterior rear view mir-
R
rors
page 212).
Y
The cameras capture the immediate sur-
roundings of the vehicle. The system sup-
ports you, e.g. when parking or if vision is
restricted at an exit.
The 360° camera images can be shown in full
screen mode or in seven different split-screen
views on the COMAND display. A split-screen
view also includes a top view of the vehicle.
This view is calculated from the data supplied
by the installed cameras (virtual camera).
The seven split-screen views are:
top view and picture from the rear view
R
camera (130° viewing angle)
top view and picture from the front camera
R
(without displaying the maximum steering
wheel angle)
top view and enlarged rear view
R
top view and enlarged front view
R
top view and trailer view (vehicles with
R
trailer tow hitch)
top view and pictures from the rearward
R
facing mirror cameras (rear wheel view)
top view and pictures from the forward
R
facing mirror cameras (front wheel view)
i
The top view and trailer view are available
for vehicles equipped with a trailer tow
hitch.
When the function is active and you shift the
transmission from position D or R to N, you
see the previous view in the COMAND dis-
play. The dynamic guidelines are hidden.
When you change between transmission
positions D and R, you see the previously
selected front or rear view.
Important safety notes
The 360° camera is only an aid. It is not a
replacement for your attention to your imme-
diate surroundings. You are always responsi-
ble for safe maneuvering and parking. When
maneuvering or parking, make sure that there
are no persons, animals or objects in the area
in which you are maneuvering.