Active Light Function - Mercedes-Benz 2015 GLK Operator's Manual

High-beam headlamps
To switch on the high-beam headlamps:
X
turn the SmartKey in the ignition lock to
position 2 or start the engine.
Turn the light switch to L or Ã.
X
Press the combination switch beyond the
X
pressure point in the direction of arrow :.
In the à position, the high-beam head-
lamps are only switched on when it is dark
and the engine is running.
The K indicator lamp in the instrument
cluster lights up when the high-beam head-
lamps are switched on.
To switch off the high-beam head-
X
lamps: move the combination switch back
to its normal position.
The K indicator lamp in the instrument
cluster goes out.
High-beam flasher
To switch on: turn the SmartKey in the
X
ignition lock to position 1 or 2 or start the
engine.
Pull the combination switch in the direction
X
of arrow =.
Hazard warning lamps
The hazard warning lamps automatically
switch on if:
an air bag is deployed.
R
the vehicle is slowed down rapidly from a
R
speed of over 45 mph (70 km/h) and
comes to a halt.
To switch on the hazard warning lamps:
X
press button :.
All turn signals flash. If you now switch on a
turn signal using the combination switch,
only the turn signal lamp on the corre-
sponding side of the vehicle will flash.
To switch off the hazard warning lamps:
X
press button :.
If the vehicle returns to a speed of over
6 mph (10 km/h) after a full application of the
brakes, the hazard warning lamps are deacti-
vated automatically.
i
The hazard warning lamps still operate if
the ignition is switched off.
Headlamp cleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is oper-
ated five times while the lights are on and the
engine is running ( page 126). When you
Y
switch off the ignition, the automatic head-
lamp cleaning system is reset and counting is
resumed from 0.

Active light function

Exterior lighting
Z
119