Installing The Display Assembly - Dell Latitude E6320 Owner's Manual

Installing The Display Assembly

1. Align the display assembly into its original position on the computer.
2. Replace and tighten the screw to secure the display assembly to the
computer.
3. Replace and connect the display cable to the system board.
4. Align the display cable bracket to its original position.
5. Replace and tighten the screws to secure the display cable bracket to the
system board.
6. Route the antenna cables through the system board.
7. Replace and tighten the screws to secure the display panel to the
computer.
8. Route the antenna cables to their original position.
display hinge covers .
9. Install the
palmrest assembly .
10. Install the
keyboard .
11. Install the
keyboard trim .
12. Install the
hard drive .
13. Install the
ExpressCard .
14. Install the
base cover .
15. Install the
optical drive .
16. Install the
Secure Digital (SD) card .
17. Install the
battery .
18. Install the
19. Follow the procedures in
After Working Inside Your Computer .
67