Table of Contents
Advertisement
ISDN PRI Call By Call Service Selection
[North America Only]
Available Services
The following Binary Facility Code can be sent to the ISDN network when the called party number is
flagged as a Service. Services and features are selected by the ISDN subscriber at the time the ISDN is
ordered. The PBX must be programmed to match the services and features provided by the ISDN provider.
AT&T
SDN
Megacom
Megacom 800
Accunet
International 800
AT&T MultiQuest
Call By Call LCR Programming
The following programming steps are an example of a long-distance call placed to any area code that be-
gins with a 2 and that call is flagged as AT&T Megacom.
CM8A4005>12 (dialed #)=0001 (go to route pattern 001)
st
CM8A0001>1 (1
choice)=00010 (use LCR pattern 000 + trk route 10)
CM855>12=11 (maximum number of digits dialed)
CM8A5000>157=02 (Kind of called party=National)
(dialed number is 10 digits NANP, select National)
CM8A5000>158=01 (Called party Number Plan ID=ISDN/Telephony Numbering Plan)
CM8A5000>159~161 are not used for this call.
CM8A5000>162=1 (Service)
CM8A5000>163=03 (Megacom)
CM8A5000>164 is not required for this call.
CHAPTER 3 SYSTEM DATA PROGRAMMING
Northern Telecom
Private
InWATS
OutWATS
Foreign Exchange
Tie Trunk
– 135 –
ISDN FEATURE PROGRAMMING
NWA-008852-001 Rev.5.0
98ch3001.fm
JULY/01/2006
Advertisement
Table of Contents
