Indicator Control
Indicator Control window allows you to select Power Indicator operation. Power
Indicator operation has three patterns.
•
Always on
•
Turns on when accessing the Network Camera
•
Always off
Notes
•
Power Indicator can be controlled in case the administrator does not
want to draw attention to the Network Camera. This may be desirable
when used for security applications.
•
Indicator Control window cannot control Ethernet Indicator on Page 15.
1.
Click [Indicator Control] on the Setup Page.
2.
Select the Power Indicator on/off. Click [Save] when finishing.
•
Click [Cancel] to quit the current settings. It returns to the Setup Page
without saving the parameters.
Operating Instructions
81