Operating Instructions
Multi-Camera
Multi-Camera window enables the setting of Multi-Camera screen. Camera
Name and IP address of each Network Camera must be entered to view the Multi-
Camera screen. Registering IP addresses of the other Network Camera enables
you to view on the Multi-Camera screen. Clicking Camera Name of Network
Camera on the Multi-Camera screen accesses the Single Camera screen to
control the image. First Network Camera is named on the Name/Time window on
Page 56. 2nd to 4th Network Cameras are named on this Multi-Camera window.
Notes
•
When using the Multi-Camera screen, all additional Network Cameras
must be defined on each of the Multi-Camera window. This will allow all
Network Cameras to be seen and selected from each Network Camera in
the entire network.
•
Global IP address is required to view the image over the Internet.
1.
Click [Multi-Camera] on the Setup Page.
78