Moving Machine By Hand - Dixon ztr dx260 Operator's Manual

Moving Machine By Hand

When pushing or pulling the mower, engage the
bypass valve on each transaxle. Access to the valves
is from the lower rear of the unit. the bypass valves
are located on the front, inner sides of the transaxles.
Set the deck to the lowest position when accessing
the pump valves.
to disengage each pump, turn the slot on the pump
valve 45 clockwise from the RUn position to the
O
BYPASS position.
36
OPeRaTION
Right side, ZT-5400 valve
WARNING!
No adjustments or maintenance should
be carried out unless:
•
•
•
the engine stopped
the ignition key removed
the parking brake activated
8050-231