Cutting Height Pedals; Seat Adjustment Lever - Dixon ztr dx260 Operator's Manual

Cutting Height Pedals

the cutting height pedals release the deck lift to allow
setting the desired deck height. Apply pressure to the
lift pedal and rotate foot to also apply pressure to the
release pedal, unlocking the deck lift.
For transport, push the lift pedal fully forward until the
deck lift latches in the transport (highest) position.

Seat Adjustment Lever

the seat can be adjusted lengthways. the lever is
located at the right side of the seat (as seen by the
driver in the seat). When making adjustments the
lever is moved to the left or upward depending on
model.
IMPORTANT INFORMATION
Seat should not be adjusted while unit is in
motion.
CONTROls
1. Lift pedal
2. Release pedal
Cut height selection pedals
Seat adjustment
2
1
8065-017
8065-088
23