Modifying Configuration Parameters - HP WL110 Quick Install Manual

The Link Test mode of this utility enables you to analyze
the communications quality between the "Initiator"
station and your Windows CE device (identified as the
"Remote Station").
In Infrastructure Networks, consult the LAN
Administrator to run the AP MANAGER tool. The
"Remote Link Test" of this utility enables the LAN
Administrator to analyze the communications quality
between the access point (identified as the "Initiator"
station) and your Windows CE device (identified as the
"Remote Station").
On devices running Windows CE v3.0, such as the iPAQ,
you can use the pocket edition of the Client Manager that
is installed together with the driver. The pocket edition of
Client Manager is not available for other versions of
Windows CE.

Modifying Configuration Parameters

To view or modify the settings of your hp wireless PC card
WL110, open the Control Panel on your Windows CE device
and double-click the Wireless Network icon.
For more information about these parameters, please consult:
The on-line help system for your Windows CE drivers by
clicking the "
C-6 Installation for Windows CE
" help icon, or
?