Power
Radio
LED
LED
Both LEDs blink once
every 10 seconds
B-4 Troubleshooting
Description/Action
The hp wireless PC card WL110 works fine, but
did not yet succeed establishing a wireless
connection with the wireless Infrastructure.
Actions:
•
Contact the LAN Administrator to verify the
Network Name assigned to the wireless
infrastructure.
•
Contact the LAN Administrator to verify the
correct value(s) of the encryption keys.
•
Contact the LAN Administrator to verify
whether the network infrastructure has been
set to deny "ANY" as valid Network Name
(Closed Network).
•
Change the configuration of your hp wireless
PC card WL110 to enter the correct Network
Name
•
If there are no access point devices available,
change the configuration of your hp wireless
PC card WL110 to run in "Peer-to-Peer"
mode.