Table of Contents
Advertisement
Static IP Addressing for Peer-to-Peer networks
In networks with Static IP addressing, the network
administrator manually assigns an IP address to each
computer. Once a Static IP address is assigned, a computer
uses the same IP address every time it reboots and logs on to
the network, unless you manually change the IP address in
the
Network Properties
addresses are easy to set up and do not require additional
network management software.
A Peer-to-Peer network environment is best suited for
addressing
Peer-to-Peer networks are also not likely to have a DHCP
server already set up on the network.
Configure TCP/IP Settings for Static IP Addressing
Note: This IP configuration should only be applied to
wireless networks that do not have a DHCP server
installed.
1. Right-click
2. Select
Network Properties
3. Select the
PC card WL110
B-8 Troubleshooting
dialog box. Networks using Static IP
, because of its simplicity.
Network Neighborhood
from the pop-up menu to display the
Properties
dialog box.
Configuration
.
on your desktop.
tab, and click
TCP/IP hp wireless
Static IP
Advertisement
Table of Contents
