Go Live
Making a Clip
Video During Multiple Alarms
Document 800-02951V3 Rev A
11/09
Figure 6-9
Retrieval Session Started from an Alarm Session
Live video can be effective when an event is still in progress. Either:
•
Start a live session at the site of the alarm (see
more information).
- or -
•
Enable Run Live Alarm (as explained
See
Making a Clip of Live
Video, page 98, and
98.
1.
While running an alarm session, select more than one alarm from the session's
tear-away player. To select specific alarms, use MS-Windows mouse and keyboard
techniques (hold down the
2.
Click Video. When a site has many cameras, you are asked to select one or more. A
Retrieval session starts, displaying the date and time of the earliest alarm that you
selected in step 1.
3.
To display a list of the other alarms selected at step 1, click the drop-down arrow to
the right of the item box (see
Rapid Eye Remote View Operator Guide
Starting a Live Session
Live Alarmed Session
Making a Clip from Recorded Video
Ctrl
key while selecting alarms).
Figure
6-9).
When an
operator starts a
Retrieval session
from an Alarm
session, text
about the alarm
is repeated in an
item box.
on page
29
for
on page 84).
on page
89